Filter
Top Products
Problem Procedure
MultiMediaCard
error occurs
Remove the MultiMediaCard from the computer
and then reinsert it in order to ensure it is firmly
connected.
If the problem persists, then you should refer to the
documentation supplied with your MultiMediaCard
for further information.
You cannot write to
a MultiMediaCard
Remove the MultiMediaCard from the computer
and check to ensure that it is not write protected.
You cannot read a
file
Check to ensure the required file is actually on the
MultiMediaCard that is inserted into the computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Pointing device
If you are using a USB mouse, you should also refer to both the USB
mouse section in this chapter, and the documentation supplied with your
mouse.
Touch Pad
Problem Procedure
The Touch Pad does
not work.
Check the Device Select settings.
Click Start > Control Panel > Hardware and
Sound > Mouse.
Pressing FN + F9 to enable.
Pressing Touch Pad ON/OFF button to enable.
On-screen pointer
does not respond to
pointing device
operation
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
Double-tapping
(Touch Pad) does
not work
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start > Control
Panel > Hardware and Sound > Mouse.
2. Within the Mouse Properties window, click the
Buttons tab.
3. Set the double-click speed as required and
click OK.
PORTÉGÉ R700 / Satellite R630
8-12 User's Manual