TP-Link H5R Network Router User Manual


 
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 102 -
¾ Gateway - This is the IP address of the gateway device that allows for contact between the
router and the network or host.
¾ Interface - This interface tells you either the Destination IP Address is on the LAN & WLAN
(internal wired and wireless networks), or on the WAN (Internet).
4.18 Bandwidth Control
Figure 4-100 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 4-100: Control
Settings and Rules List. Click any of them, and
you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
4.18.1 Control Settings
Choose menu “Bandwidth Control Control Settings”, and then you can configure the
Egress Bandwidth and Ingress Bandwidth. For optimal control of the bandwidth, please select the
right Line Type and ask your ISP for the total bandwidth of the egress and ingress.
Figure 4-101 Bandwidth Control Settings
¾ Enable Bandwidth Control - Check this box so that the Bandwidth Control settings can take
effect.
¾ Line Type - Select the right type for you network connection. If you don’t know how to choose,
please ask your ISP for the information.
¾ Egress Bandwidth - The upload speed through the Internet port
. Its value should be less than
1000000Kbps.
¾ Ingress Bandwidth - The download speed through the Internet port. Its value should be less
than 1000000Kbps.