Filter
Top Products
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 114 -
3. Click the Upgrade button.
4. The router will reboot while the upgrading has been finished.
) Note:
1) New firmware versions are posted at http://www.tp-link.com and can be dow
nloaded for free.
There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the router rather than the
configuration, you can try to upgrade the firmware.
2) When you upgrade the router's firmware, you may lose its current configurations, so before
upgrading the firmware please write down some of your customized settings to avoid losing
important settings.
3) Do not turn off or reset the router while the firmware is being upgraded. Loss of power during
the upgrade could damage the router.
4) The firmware version must correspond to the hardware.
5) The upgrade process takes a few moments and the router reboots automatically when the
upgrade is complete.
4.21.4 Factory Defaults
Choose menu “System Tools → Factory Defaults”, and then you can restore the configurations
of the router to factory defaults on the following screen.
Figure 4-118 Factory Defaults
Click the Restore button to reset all configuration settings to their default values.
¾ Default User Name: admin
¾ Default Password: admin
¾ Default IP Address: 192.168.1.1
¾ Default Subnet Mask: 255.255.255.0
) Note:
All user-defined settings will be lost after the restoration.