Filter
Top Products
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 5 -
Off The WAN port is not connected.
On The WAN port is connected.
(WAN)
Blink The WAN port is transferring data.
Off No LAN port is connected.
(LAN)
On At least one LAN port is connected.
Off The router hasn’t formed a powerline network.
On The router has formed a powerline network.
(Powerline)
Blink The powerline network is transferring data.
Table 1-1 LED description
)
Note:
1) After a device is successfully added to the network by WPS function, the WPS LED will
keep on for about 5 minutes and then turn off.
2) You can stop the WPS process as follows:
z If you start the WPS process on the “Wireless 2.4GHz → WPS → Add a New
Device” or “Wireless 5GHz → WPS → Add a New Device” page, you can click
Stop on the current page to stop the process.
z If you start the WPS process by pressing the router’s Reset/WPS button, you need
to click Stop on both pages.
The WPS LED turns off after you stop the WPS process.
3) The router is set to working concurrently in 2.4GHz and 5GHz by default. If you desire to
choose the working frequency, please refer to 4.5 Dual Band Selection
.
¾ Rear panel
Figure 1-2 Rear panel