Filter
Top Products
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 64 -
4.10 DHCP
Figure 4-48 DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-48), DH
CP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function.
4.10.1 DHCP Settings
Choose menu “DHCP → DHCP Settings”, and then you can configure the DHCP Server on the
page as shown in Figure 4-49.The router is set up by default as a DHCP (Dynamic Host
Configur
ation Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the router on the LAN.
Figure 4-49 DHCP Settings
¾ DHCP Server - Enable or Disable the DHCP server. If you disable the server, you must
have another DHCP server within your network or else you must configure the computer
manually.
¾ Start IP Address - Specify an IP address for the DHCP Server to start with when assigning
IP addresses. 192.168.1.100 is the default start address.
¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP
addresses. 192.168.1.199 is the default end address.
¾ Address Lease Time - The Address Lease Time is the amount of time a network user will
be allowed connection to the router with their current dynamic IP Address. Enter the amount