Filter
Top Products
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 20 -
Figure 3-14 Quick Setup – Wireless 5GHz
¾ Wireless Radio - Displays whether the wireless function is enabled or not.
¾ Wireless Network Name - Also called the SSID (Service Set Identification). Enter a
value of up to 32 characters. The same name must be assigned to all wireless devices in
your network. The default SSID is set to be TP-LINK_5GHz_XXXXXX. This value is
case-sensitive. For example, TEST is NOT the same as test.
¾ Region - Select your region from the drop-down list. This field specifies the region where
the wireless function of the router can be used. It may be illegal to use the wireless function
of the router in a region other than one of those specified in this field. If your country or
region is not listed, please contact your local government agency for assistance.
)
Note:
Limited by local law regulations, version for North America does not have region
selection option.
¾ Mode - This field determines the wireless mode which the router works on.
z 11a only/11n only - Select the corresponding mode if you are using 802.11a or
802.11n wireless clients only.
z 11an mixed - Select if you are using both 802.11a and 802.11n wireless clients.
¾ Channel Width - Select any channel width from the drop-down list. The default setting
is “Auto”, which can adjust the channel width for your clients automatically.
¾ Channel - This field determines which wireless channel will be used. It is not necessary
to change the wireless channel unless you notice interference problems with another