Filter
Top Products
H5R & H5E AV500 Hybrid Wi-Fi Starter Kit
- 123 -
¾ IP Address - Enter the IP address of your extender or reset it in dotted-decimal notation
(factory default: 192.168.1.254).
¾ Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
)
Note:
If you change the IP Address of LAN, you must use the new IP Address to log in to the extender.
5.4 Wireless
Figure 5-4 Wireless menu
There is only one submenu under the Network menu (shown in Figure 5-4): W
ireless Statistics.
Click it, and you will be able to configure the corresponding function.
5.4.1 Wireless Statistics
Choose menu “Wireless → Wireless Statistics”, and then you can see the MAC Address,
Current Status, Received Packets and Sent Packets for each connected wireless station.
Figure 5-5 Wireless Statistics
¾ MAC Address - The connected wireless station's MAC address
¾ Current Status - The connected wireless station's running status, one of STA-AUTH/
STA-ASSOC/ STA-JOINED/ WPA/ WPA-PSK/ WPA2/ WPA2-PSK/ AP-UP/ AP-DOWN/ Disconnected
¾ Received Packets - Packets received by the station
¾ Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.