TP-Link TL-SL5428E Switch User Manual


 
Step Operation Description
3 Configure for
requirement 2
and 4
On ACLACL ConfigACL Create page, create ACL 100.
On ACLACL ConfigStandard-IP ACL page, select ACL 100,
create Rule 1, configure operation as Deny, configure S-IP as
10.10.70.1 and mask as 255.255.255.0, configure D-IP as 10.10.50.1
and mask as 255.255.255.0, configure the time-range as No Limit.
On ACLACL ConfigStandard-IP ACL page, select ACL 100,
create Rule 2, configure operation as Permit, configure S-IP as
10.10.70.1 and mask as 255.255.255.0, configure D-IP as 10.10.88.5
and mask as 255.255.255.255, configure the time-range as work_time.
On ACLACL ConfigStandard-IP ACL page, select ACL 100,
create Rule 3, configure operation as Deny, configure S-IP as
10.10.70.1 and mask as 255.255.255.0, configure D-IP as 10.10.88.5
and mask as 255.255.255.0, configure the time-range as No Limit.
On ACLPolicy ConfigPolicy Create page, create a policy named
limit1.
On ACLPolicy ConfigAction Create page, add ACL 100 to Policy
limit1.
On ACLPolicy BindingPort Binding page, select Policy limit1 to
bind to port 16.
4 Configure for
requirement 3
and 4
On ACLACL ConfigACL Create page, create ACL 101.
On ACLACL ConfigStandard-IP ACL page, select ACL 101,
create Rule 4, configure operation as Deny, configure S-IP as
10.10.50.1 and mask as 255.255.255.0, configure D-IP as 10.10.70.1
and mask as 255.255.255.0, configure the time-range as No Limit.
On ACLACL ConfigStandard-IP ACL page, select ACL 101,
create Rule 5, configure operation as Deny, configure S-IP as
10.10.50.1 and mask as 255.255.255.0, configure D-IP as 10.10.88.5
and mask as 255.255.255.255, configure the time-range as work_time.
On ACLPolicy ConfigPolicy Create page, create a policy named
limit2.
On ACLPolicy ConfigAction Create page, add ACL 101 to Policy
limit2.
On ACLPolicy BindingPort Binding page, select Policy limit2 to
bind to port 4.
Return to CONTENTS
148