Filter
Top Products
Th
e following entries are displayed on this screen:
Global Config
802.1X: Enable/Disable the 802.1X function.
Auth Method: Select the Authentication Method from the pull-down list.
EAP-MD5: IEEE 802.1X authentication system
uses extensible authentication protocol (EAP) to
exchange information between the switch and the
client. The EAP protocol packets with
authentication data can be encapsulated in the
advanced protocol (such as RADIUS) packets to be
transmitted to the authentication server.
PAP: IEEE 802.1X authentication system uses
extensible authentication protocol (EAP) to
exchange information between the switch and the
client. The transmission of EAP packets is
terminated at the switch and the EAP packets are
converted to the other protocol (such as RADIUS)
packets for transmission.
Guest VLAN: Enable/Disable the Guest VLAN feature.
Guest VLAN ID: Enter your desired VLAN ID to enable the Guest VLAN
feature. The supplicants in the Guest VLAN can access
the specified network source.
Authentication Config
Quiet: Enable/Disable the Quiet timer.
Quiet Period: Specify a value for Quiet Period. Once the supplicant
failed to the 802.1X Authentication, then the switch will not
respond to the authentication request from the same
supplicant during the Quiet Period.
Retry Times: Specify the maximum transfer times of the repeated
authentication request.
Supplicant Timeout: Specify the maximum time for the switch to wait for the
response from supplicant before resending a request to
the supplicant.
Server Timeout: Specify the maximum time for the switch to wait for the
response from authentication server before resending a
request to the authentication server.
11.5.2 Port Config
On this page, you can configure the 802.1X features for the ports basing on the actual network.
Choose the menu Network Security→802.1X→Port Config to load the following page.
174