Filter
Top Products
Private VLAN technolog
y is mainly used in campus or enterprise networks to achieve user
layer-2-separation and to save VLAN resources of uplink devices.
The Elements of a Private VLAN
Primary VLAN: A Private VLAN has one Primary VLAN and one Secondary VLAN. Primary VLAN
is the user VLAN uplink device can identify but it is not the actual VLAN the end user is in. Every
port in a private VLAN is a member of the primary VLAN. The primary VLAN carries unidirectional
traffic downstream from the promiscuous ports to the host ports and to other promiscuous ports.
Secondary VLAN: .Secondary VLAN is the actual VLAN the end user is in. Secondary VLANs are
associated with a primary VLAN, and are used to carry traffic from hosts to uplink devices.
Promiscuous: A promiscuous port connects to and communicates with the uplink device. The
PVID of the promiscuous port is the same with the Primary VLAN ID. One promiscuous port can
only join to one Primary VLAN.
Host: A host port connects to and communicates with terminal device. The PVID of the host port is
the same as the Secondary VLAN ID. One host port can only belong to one Private VLAN.
Features of Private VLAN
1. A Private VLAN contains one Primary VLAN and one Secondary VLAN.
2. A VLAN can not be set as the Primary VLAN and Secondary VLAN simultaneously.
3. A Secondary VLAN can only join one private VLAN.
4. A Primary VLAN can be associated with multi-Secondary VLANs to create multi-Private
VLANs.
Private VLAN Implementation
To hide Secondary VLANs from uplink devices and save VLAN resources, Private VLAN
containing one Primary VLAN and one Secondary VLAN requires the following characteristics:
Packets from different Secondary VLANs can be forwarded to the uplink device via
promiscuous port and carry no corresponding Secondary VLAN information.
Packets from Primary VLANs can be sent to end users via host port and carry no Primary
VLAN information.
Private VLAN is designed to save VLAN resource by means of Port configuration synchronization
among the MAC address tables of VLANs and MAC address duplication. To achieve these
requirements described above, the following two aspects are required:
1) Create Private VLAN: A Private VLAN includes one Primary VLAN and one Secondary VLAN,
the PVID of the promiscuous port is equal to the Primary VLAN ID and the PVID of the host
port is the same as the corresponding Secondary VLAN ID, moreover, the egress rule of all
ports is untag by default, that is, only those untagged packets can be forwarded, but you can
modify the egress rule on VLAN→802.1Q VLAN→VLAN Config page.
74