Filter
Top Products
30
Chapter 4 Web-based Management
Whenever a computer on your LAN attempts to access the
Internet, the UT-300R2 will use this PVC to direct packets
to the Internet, and this PVC will become the default
gateway to the Internet for your LAN.
6 Under the
Encapsulation
heading, select either LLC or
VcMux, as instructed by your ISP.
7 When you are satisfied that all the WAN settings are
configured correctly, click on the
Apply
button.
8 The new settings must be saved and the UT-300R2 must
be restarted for the settings to go into effect. To manually
save and reboot the UT-300R2, click on the
Tools
directory tab and then click the
System
menu button. On
the menu that appears, click he
Save & Restart
button.
The UT-300R2 will save the new settings and restart.
Upon restarting the UT-300R2 will automatically establish
the bridged WAN connection.
Static IP Address for WAN
When a PVC (of the available list of seven) on the UT-300R2 is
configured to use a Static IP Address assignment for the WAN
connection, you must manually assign a global IP Address,
Subnet Mask and Gateway IP Address used for the WAN
connection provided by this PVC. Most users will also need to
configure a DNS server IP setting in the DNS Settings
configuration menu (see below). Follow the instruction below to
configure the UT-300R2 to use Static IP Address assignment
for the WAN connection.