Filter
Top Products
4 © 2007 VBrick Systems, Inc.
•Power cable
• RCA connector
T To connect the IPR:
1. Using the provided RCA cable, connect the IPR video out to a TV monitor using the
yellow video connector.
2. Using the provided RCA cable, connect the IPR audio out to a TV monitor using the
corresponding red and white audio connectors.
3. Using customer-provided cables, connect the IP Receiver to your Ethernet network, using
the
LAN port.
4. Connect a USB keyboard and mouse to the USB ports and install two AA batteries in the
remote control.
5. Connect the IPR power cord to a powerstrip and power on the IPR using the triangular
Power button on the front panel.
Figure 3. WM IPR – Rear Panel
Figure 4. WM IPR – Front Panel
Composite Composite video out.
S-Video Connect to standard TV.
Audio Out Audio out left and right.
LAN Connect to local area network.
USB Ports (2) Connect USB mouse and/or keyboard.
VGA Connect to a standard TV or a projector with a VGA port.
Power Plug Connects to power cord.
Connected Yellow. Blinks when you press any button on remote control.
Standby Orange. Press Power button to toggle Standby on or off.
Recording Red. Steady red when a recording is in progress.
Power Green. Steady green when power is applied.