Filter
Top Products
Local Mode Configuration
VBrick WM IP Receiver Admin Guide 25
FTP client. Note that the FTP root folder has 8 MB of writable storage available for local UI
files and images.
The
sample folder at the root level of the FTP server has all the files that are used to create
the default local page. (These files are always available and are rewritten when you reboot the
IPR. For this reason, be sure to copy these files to a different folder if you customize the
interface.) Use these sample files to create your own local files and FTP them to the web
server. When you are done, go to the
General Configuration page, uncheck the Default Local
page, and enter the Custom Local Path to the new files, for example myLocalUI/myUI.asp
It is important to note that the WM IPR does not support anonymous login. When logging in
to the IPR FTP server from the Windows Explorer be sure to include the username and
password in the following format:
ftp://admin:admin@<ipr-IPaddress>
T
To access the IPR FTP server from Windows Explorer:
1. If using Internet Explorer 7, be sure you have the browser configured to
Enable FTP
Folder view (outside of Internet Explorer)
as explained in note above.
2. Open Windows Explorer (not Internet Explorer) and enter an FTP command using the
FTP username and password as shown in the following example:
ftp://admin:admin@<IPR-IPaddress>
Note Windows Explorer FTP uses Internet Explorer components and works differently
with Internet Explorer 7 than with earlier versions. To view FTP files in the Windows
Explorer, open Internet Explorer 7, then go to
Tools > Internet Options >
Advanced > Browsing
and check Enable FTP Folder view (outside of Internet
Explorer)
. Then, after logging in, go to the Page menu and select Open FTP Site in
Windows Explorer
.