Filter
Top Products
Getting Started
VBrick WM IP Receiver Admin Guide 7
3. Press Apply to exit IWS and open the IPR interface in the selected mode
Table 1. Local-Fullscreen URL Syntax
Local-Fullscreen
The WM IPR can operate in a fullscreen mode. One channel is
displayed and this stream uses the entire screen of the attached
monitor. Table 1 below shows the URL syntax for Local-Fullscreen.
Portal Server
When installed with an ETV Portal Server, the features and options of
the VBrick WM IPR are controlled through the VBrick Portal Server.
See the Portal Server Admin Guide for more information.
Local
In Local mode, the IPR will retrieve and render the user interface web
page from the configured local path. This is typically located on the
IPR's file system. The program guide on the viewer web page will
include the streams defined for
Local mode on the IWS configuration
page. See Local Mode Configuration
on page 23 for more
information.
Stream Type URL Syntax
Multicast WM Multicast IP address of VBrick WM Appliance. On the WM
Appliance, go to Configuration: Encoder > Multicast and use the
Multicast URL, for example:
http://<ip_address>/vbs1multi.nsc
Unicast WM HTTP
(Live)
HTTP URL of VBrick WM Appliance. On the WM Appliance, go to
Configuration: Encoder > Server and use the
HTTP URL, for
example:
http://<ip_address>:8080/vbrickvideo1/group1
If your WM Appliance is configured to serve multiple bit rates (MBR)
you must configure the WM IPR with a group-specific URL, for
example:
http://<ip_address>:8080/vbrickvideo1/group1
Unicast or HTTP
(VOD)
Depends on VOD server. The complete path including HTTP URL
and publishing point, for example:
http://<ip_address>/VBP/MYWMVideos/myVideo.wmv