Filter
Top Products
VBrick WM IP Receiver Admin Guide 23
Chapter 4
Local Mode Configuration
Topics in this chapter
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Configuring Streams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Customizing the Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Overview
When the Start mode is configured for Local on the General Configuration page, the IPR
will display a list of all streams that are currently configured on this page. In Local mode, the
IPR user interface is either a pre-configured "default" page or a customized page that you
have designed and FTPed to the IPR web server. The user interface consists of multiple files
that reside at the root level of the web server. Figure 7 below shows the default Local page
after it has been configured to include stream information.
Figure 7. Default Interface in Local Mode
Configuring Streams
Use the following steps to add streams to the Local interface page. Note that changes to the
Local-Mode URLs are not saved until you press Apply. If you accidentally delete stream, and
did not press
Apply, you can simply log out and log back in to recover.
T To add streams to the Local interface:
1. Go to the
General Configuration page in IWS.