Filter
Top Products
BEFORE YOU BEGIN 5
Installing
Installation is a quick, three-step process:
■ Install the software
■ Connect the scanner
■ Register your scanner
BEFORE YOU BEGIN
Please make sure of the following before you begin installation:
■ If your computer has AntiVirus or AntiSpyware software
running, you may see messages during installation asking you to
allow the installation to proceed. In each case you should allow
the installation to proceed. Alternatively, you can turn off the
AntiVirus or AntiSpyware software before installing your
scanner, but if you do, make sure to turn it back on again when
installation is finished.
■ If you already have a scanner connected to your computer it is
recommended that you remove its driver program prior to
installing your Visioneer OneTouch 7400 USB scanner. Please
refer to the user manual for your previous scanner for
instructions to remove the driver and software applicable to that
scanner.
■ The information in this User’s Guide may cover software not
provided with the scanner you purchased. Disregard any
information about software not applicable to your scanner.
Please visit our web site at www.visioneer.com for the latest
software updates for your Visioneer OneTouch 7400 USB
scanner.
■ If your computer is running Windows Vista, you may see the
Vista User Access Control screen asking you to confirm system
changes. Click the continue button to allow the installation to
proceed.