Filter
Top Products
62 VISIONEER ONETOUCH 7400 USB SCANNER INSTALLATION GUIDE
4. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
TWAIN—The Basic Interface or Advanced Interface opens for you
to configure the scanning. See “Scanning From the Basic TWAIN
Interface” on page 85 or “Scanning From the Advanced TWAIN
Interface” on page 87.
WIA—The Windows Image Acquisition (WIA) interface opens for
you to configure the scanning. The WIA option is only available if
your computer is running Microsoft Windows XP or Windows
Vista. See “Scanning from the Windows Image Acquisition (WIA)
Interface” on page 99.
5. Click OK or Apply on the OneTouch Properties window.
TO SCAN USING CONFIGURE BEFORE SCAN
1. Put the document or photo on the flatbed glass.
2. Click on the button you set to use the Configure Before Scan
option.
In the example above, the Scan button has been setup to use the
Configure Before Scan option.
Select a button.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the
menu, and choose
the interface to use
for scanning.