Filter
Top Products
APPENDIX
INDEX
CONTENTS
INDEX
CONTENTS
44
44
Caring for your tablet and tools
Keep your Graphire4 tools and tablet surface clean. Dust and dirt particles can stick to your tools and cause
excessive wear to the tablet surface. Regular cleaning with a soft, damp cloth will help prolong the life of
your tablet surface and tools; you can also dampen the cloth using a very mild soap diluted with water.
Do
not
use volatile liquids, such as paint thinner or benzene, as they may damage the plastic case.
Keep your tablet and tools in a clean, dry place and avoid extremes in temperature. Room temperature is
best. Also, your Graphire4 tools and tablet are not made to come apart. Twisting the pen case can break
the pen. Taking apart the product will void your warranty.
Replacing the pen tip
The pen tip (nib) will wear with normal use. When the nib gets too short or develops a flat point, you can
replace it with another nib. Simply clasp the old nib with a tweezer, needle-nosed plier, or similar instrument
and pull it straight out of the pen. Then slide the end of the new nib straight into the barrel of the pen – firmly
push the nib until it stops.
To order replacement parts, see order
ing parts and accessories.
Important: When the
Graphire4 pen is not in
use, place it in the pen
storage compartment, the
pen stand, or lay it flat on
your desk. To maintain
the sensitivity of your
pen, do not store the pen
in a container where it will
rest on the tip or eraser.