Filter
Top Products
/T Reset Network Interface +-----------------------+
/D, /E, /I, /T Commands: Add /Y to bypass "Sure (Y/N)?"
Figure 3.1: The Supervisor Level Help Screen
Port Status Screen: Type /S [Enter] to display the Port Status Screen (Figure 3.2),
which summarizes conditions at all Ports. The various fields of the Port Status Screen are
explained in Section 6.1.
PORT STATUS: Version 1.02, Site ID: (undefined)
PORT | NAME | PASSWORD | STATUS | MODE | BUFFER COUNT
-----+------------------+------------------+--------+------+--------------
01 | (undefined) | (undefined) | Free | Any | 0
02 | (undefined) | (undefined) | Free | Any | 0
03 | (undefined) | (undefined) | Free | Any | 0
04 | (undefined) | (undefined) | Free | Any | 0
05 | (undefined) | (undefined) | Free | Any | 0
06 | (undefined) | (undefined) | Free | Any | 0
07 | (undefined) | (undefined) | Free | Any | 0
08 | (undefined) | (undefined) | Free | Any | 0
| | | | |
09 | (undefined) | (undefined) | Free | Any | 0
10 | (undefined) | (undefined) | Free | Any | 0
11 | (undefined) | (undefined) | Free | Any | 0
12 | (undefined) | (undefined) | Free | Any | 0
13 | (undefined) | (undefined) | Free | Any | 0
14 | (undefined) | (undefined) | Free | Any | 0
15 | (undefined) | (undefined) | Free | Any | 0
16 | (undefined) | (undefined) | Free | Any | 0
Enter /H for Command Menu
Figure 3.2: The Port Status Screen (Defaults Shown)
5.
Port Connection: The CMS can perform two different types of port connections;
Resident Connections and Third Party Connections.
Resident Connection: Your resident port (e.g. Port 1) issues a /C command to
connect to a second port.
To connect Port 1 to Port 2, type /C 2 [Enter]. While Port 1 is connected,
the CMS will not recognize commands issued at Port 1. However, the unit
will recognize a Resident Disconnect Sequence issued at Port 1 or Port 2.
i.
Issue the Resident Disconnect Sequence (Logoff Sequence); type
[Enter]+++[Enter].
ii.
.
Third Party Connection: Your resident port (e.g. Port 1) issues a /C command tob.
6.