Filter
Top Products
RS-232 ports. To display the Port Status Screen, access the command mode and type /S
[Enter], the screen will appear as shown in Figure 6.1.
Although both Supervisors and Users can display the Port Status Screen, the screen will appear
slightly different, depending upon whether the command mode was accessed with the Supervisor
Password or a Port Password. When a Port Password (User Mode) is entered at login, the Port
Status Screen will only display the status of those ports that share the same Port Password that
was entered at login.
When the Supervisor Mode is active, the Port Status Screen offers the option to either display or
suppress Port Passwords. Normally, when the /S command is invoked, the Password column will
read either "defined" or "undefined", depending upon whether or not the password for each port
has been specified. To display the Port Status Screen with Port Passwords included, type /SP
and then press [Enter]. Note that the /SP command option is not available in User Mode.
PORT STATUS: Version 1.02, Site ID: (undefined)
PORT | NAME | PASSWORD | STATUS | MODE | BUFFER COUNT
-----+------------------+------------------+--------+------+--------------
01 | (undefined) | (undefined) | Free | Any | 0
02 | (undefined) | (undefined) | Free | Any | 0
03 | (undefined) | (undefined) | Free | Any | 0
04 | (undefined) | (undefined) | Free | Any | 0
05 | (undefined) | (undefined) | Free | Any | 0
06 | (undefined) | (undefined) | Free | Any | 0
07 | (undefined) | (undefined) | Free | Any | 0
08 | (undefined) | (undefined) | Free | Any | 0
| | | | |
09 | (undefined) | (undefined) | Free | Any | 0
10 | (undefined) | (undefined) | Free | Any | 0
11 | (undefined) | (undefined) | Free | Any | 0
12 | (undefined) | (undefined) | Free | Any | 0
13 | (undefined) | (undefined) | Free | Any | 0
14 | (undefined) | (undefined) | Free | Any | 0
15 | (undefined) | (undefined) | Free | Any | 0
16 | (undefined) | (undefined) | Free | Any | 0
Enter /H for Command Menu
Figure 6.1: The Port Status Screen (Supervisor Mode, Defaults Shown)
As shown in Figure 6.1, The Port Status Screen lists the following items:
Name: The user-defined name for each port.●
Password: The user-defined password for each port. Note that actual passwords are not
displayed; this column will read either "undefined" or "defined". To display Port
Passwords, type /SP [Enter] (Supervisor Mode Only).
●
Status: The connect status of each port. When the port is connected, this column will list
the number of the other CMS port connected to this port. An "N" indicates that this port is
●