Filter
Top Products
RS232 Port Interface: 16 RS232 serial inputs use DB9 connectors configured as DTE
ports.
●
Network Interface: 10Base-T Ethernet, RJ45●
Coding: Asynchronous, 7/8 bits ASCII.●
Parity: Even, Odd, None●
Stop Bits: 1 or 2.●
Data Rate: 300 to 115.2K bps (all standard rates).●
Flow Control: XON/XOFF, RTS/CTS, Both, or None.●
Timeout: No activity timeout disconnects port. 1, 5, 10, 15, 30 seconds, 1, 5, 15, 30, 90
minutes.
●
Memory: Stores Parameters and captured data. Non-volatile 512K SRAM buffer
memory. Statically allocated.
●
Break: Accept Break or Refuse Break●
Option Switch: 8 position DIP switch, selects default settings for baud rate, flow control,
response message format, and command echo.
●
LEDs: Power On, Ready, Net, Data Activity for Ports 1 through 16.●
Temperature: 0°C to 45°C (operating)●
Power:
AC Version: IEC-32 Inlet, 115/230 VAC, 50/60 Hz, 5 watts❍
DC Version: Terminal Strip (#6-32), -48 VDC, 0.2 Amp Max.❍
●
Size: 2.8" x 17" x 6.8" (H x W x D)●
Weight: 8 lbs. shipping weight●
Humidity: 10 to 90% RH, Non-Condensing●
Venting: Side vents are used to dissipate heat generated within the unit. When mounting
the unit in an equipment rack, make certain to allow adequate clearance for venting.
●
Appendix C. Customer Service
Customer Service hours are from 8:00 AM to 5:00 PM, PST, Monday through Friday. When
calling, please be prepared to give the name and make of the unit, its serial number and a
description of its symptoms. If the unit should need to be returned for factory repair it must be
accompanied by a Return Authorization number from Customer Service.
WTI Customer Service
5 Sterling
Irvine, California 92618
949-586-9950
Toll Free: 1-800-854-7226
Email: service@wti.com