Filter
Top Products
display the System Parameters Menu.
Site ID Message: (Up to 32 characters; Default = undefined) Type 1 and press [Enter],
the Site I.D. Prompt will appear. Key in the desired text and press [Enter] . To display the
Site I.D., type /J [Enter]. The Site ID is also listed on the Port Status and Port
Diagnostic Screens.
2.
Supervisor Password: (Up to 32 characters; Default = undefined) Type 2 and press
[Enter], a prompt will appear. Key in the desired password then press [Enter], the CMS
will prompt you to re-key the password in order to confirm spelling and capitalization.
Key in the password a second time, and then press [Enter].
3.
Note:
The Supervisor Password is case sensitive. Make certain to note the exact
password entered, including the case of each letter.
●
Make certain to write down your Supervisor Password. If the password is lost
or forgotten, you will not be able to access Supervisor Level commands
unless you initialize the unit and clear all parameters as described in
Section 4.3.
●
5.5. Port Configuration
5.5.1. Configuration Conventions
When responding to prompts, invoking commands, and selecting items from the port
configuration menus, note the following:
To select an item from a Port Configuration menu, key in the number for the item and
press [Enter].
●
To clear an item in a Port Configuration menu, enter the number for the desired item and
press [Enter]. When the prompt appears, press [Space] and then press [Enter].
●
When defining the Port Name, do not use the forward slash character (/), double quotes
("), the asterisk character (*), or blank spaces.
●
Port Names cannot begin with a number.●
A Port cannot be named "N", this name is reserved for the Network Port.●
Refer to the instructions in each screen for additional functions available under that
screen.
●