Xantrex Technology XW4548-120/240-60 Power Supply User Manual


 
System Components and Accessories
975-0239-01-01 1–3
System Components and Accessories
XW Inverter/Charger
The XW Inverter/Charger is a modular “building block” sine-wave inverter/charger that
can be used for both residential and commercial stand-alone, grid-backup, and grid-tie
applications with battery energy storage. The XW Series is a self-contained DC to AC
inverter, battery charger, and AC transfer switch. Up to three inverters can be installed in
parallel to create larger 120-240-volt, 3-wire, single-phase systems allowing for increased
capacity.
A Battery Temperature Sensor (FGA # 808-0232-02) is also included with the XW
Inverter/Charger. The Battery Temperature Sensor monitors the temperature of the battery
bank and adjusts the charging accordingly. See page 2–13 for installation instructions for
this accessory.
XW Conduit Box
A conduit box (FGA # 865-1025) is available to enclose the bottom of the XW
Inverter/Charger and protect the cabling. Use of the conduit box may be required
depending on the local electrical code. Be sure to consult with the local electrical authority
to ensure the installation is code-compliant.
Figure 1-2
XW Inverter/Charger
Figure 1-3
XW Conduit Box