Filter
Top Products
ENWW Guidelines for using media 117
Labels
Label construction
When selecting labels, consider the quality of the following components:
● Adhesives: The adhesive material should be stable at 200° C (392° F), the printer’s
maximum temperature.
● Arrangement: Only use labels with no exposed backing between them. Labels can peel off
sheets that have spaces between the labels, causing serious jams.
● Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.5 in.) of curl in any
direction.
● Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.
Transparencies
Transparencies must be able to withstand 200° C (392° F), the printer’s maximum temperature.