Xerox 150 Scanner User Manual


 
DocuMate 150 Scanner User’s Guide 47
Scanning
Canceling a Configure Before Scan
To cancel a scan after scanning has begun:
1. Click on the Cancel button in the scanning progress window.
2. The following window will open asking you if you want to cancel the
entire job.
Yes—scanning stops and all pages scanned in this batch, up to
this point, will be deleted. The TWAIN interface will close and you
can restart your scan from the beginning.
Choose Yes if the TWAIN scan settings are incorrect for your
current scanning batch.
For instance, the Scan Mode is Black & White but you want to
scan your documents in color, choose Yes to delete any scanned
pages, then select the correct Picture Type and restart the
scanning.
No—scanning stops, but all pages scanned in this batch, up to
this point, are not deleted and the TWAIN interface remains open.
You can place a new page in the ADF, adjust the TWAIN settings
for the new page, then click on the Scan button in the TWAIN
interface to continue scanning. At the end of the scanning batch,
all pages from the first portion of the scan and second will be sent
to the Destination Application.
Choose this option if, for instance, you have been scanning a
black & white document but you want to insert a color page into
the document. Instead of having to re-scan the entire stack, you
can stop the current scan, change the Picture Type from Black &
White to Color, then restart the scanning without losing the pages
already scanned.