Filter
Top Products
Step 1. Set Up the Printer 3-3
Step 1. Set Up the Printer
To set up the printer for network connectivity:
1
Run NWADMIN, NWADMIN32 or PCONSOLE to set up a printer and
queue objects. Refer to the Novell documentation, if needed.
2
Make certain that your printer is properly connected to the network with
the appropriate cabling. See Chapter 1 Network Printer Features for
detailed information on making the physical connections needed to install
the printer on your network.
3
Press the
Administration
button, located on the copier/printer Control
Panel.
4
Press
Tools
on the Touch Screen.
5
Using the keypad, enter your
Access Number
and then press
Enter
on the
Touch Screen. The default Access Number is 11111. It may have been
changed by a System Administrator.
6
Press
Machine Setup
on the Touch Screen. The list of available Items and
their current settings is displayed.
7
Press
IP Address
in the Items list, or use the scroll buttons to locate the
IP
Address
field.
8
Press
Change Settings
on the Touch Screen.
9
The IP Address must be entered with leading zeroes. For example, an IP
Address of 13.145.200.4 must be entered as 013145200004. After entering
the IP Address using the keypad, press
Save
.
10
Press
Frame Type
, located in the Items list, or use the scroll buttons to
locate the
Frame Type
.
11
Press
Change Settings
on the Touch Screen.
12
After pressing the desired button for
Frame Type
, press
Save
.
13
If you are using Token Ring, also set the
Source Routing
value.