Filter
Top Products
Step 2. Customize Printer Connectivity Settings 6-11
5
If the IP Address Resolution is
Static
, make sure that the
IP Address
,
Host Name
,
Subnet Mask
, and
Gateway Address
are set to the correct
values. If the IP Address Resolution is
DHCP
, these fields will be read-
only.
6
Click
Apply New Settings
if any changes were made.
7
Provide a
User Name
and
Password
when prompted. (The default User
Name is
Admin
with a capital "A" and the default Password is
11111
.)
8
Power off and power on the copier/printer. Allow at least 30 seconds
between powering off and powering on the printer. A Configuration
Report will print in approximately 5 minutes. The information on the
Configuration Report can be very helpful in completing the network
installation and troubleshooting problems with your copier/printer.
9
Continue with Step 3 Print a Test Page.