Xerox 50 LP/ST Copier User Manual


 
3-12 Novell NetWare Network Installation
4
Click
Connectivity + Protocols + NetWare
in the Properties tab menu to
view current NetWare information. You may need to scroll to view all of
the available information.
5
Review, and if necessary, edit the NetWare settings.
6
Click
Apply New Settings
if any changes were made.
7
Provide a
User Name
and
Password
when prompted. (The default User
Name is
Admin
with a capital "A" and the default Password is
11111
.)
8
Power off and power on the copier/printer. Allow at least 30 seconds
between powering off and powering on the printer. A Configuration
Report will print in approximately 5 minutes. The information on the
Configuration Report can be very helpful in completing the network
installation and troubleshooting problems with your copier/printer.
9
Continue with Step 3 Print a Test Page.