Filter
Top Products
7 Paper and Other Media
84 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide
NOTE: To avoid jams and misfeeds, do not load paper on top of any remaining paper
in the tray. Remove the paper, and reload it on top of the new stock loaded.
2. If required, move the paper tray
guides further out to load the
new stock.
To adjust the side and rear
guides, pinch the guide lever on
each guide and slide the guides to
their new position.
To secure the guides in position,
release the levers.
NOTE: When changing the size or type of stock in the tray, refer to Paper Tray
Attributes in the Setups chapter on User Guide. For more information on
reprogramming the tray, contact the Key Operator.
3. Load the paper neatly and tightly
against the left-hand side of the
tray.
NOTE: Do not load paper above the
maximum fill line.
NOTE: When making single/double
sided copies on perforated paper,
load the paper so that the opposite
side to the perforations feeds first.
Feeding the perforated edge first may cause paper jams.
4. If the paper guides have been
moved, slide the guides to just
touch the edge of the paper.
NOTE: When loading standard size
paper, set the guides onto the
notches on the tray to match the
paper size. The machine recognizes
8K/16K paper as standard size even
though paper trays have no notches
for these sizes.
5. Close the paper tray.
Paper can be loaded either short edge feed or long edge feed.
Long edge feed
(LEF)
Short edge feed
(SEF)