Filter
Top Products
Scanning From One Touch DocuMate 742
2-12 User’s Guide
The Device Settings Tab
A Device Settings tab is on the Scan Configurations dialog box when your selected Destination
Application sends the scanned image to a printer, fax application, or other device. You use the
options on the Device Settings tab to select settings for the device.
1. Click on the Device Settings tab.
Fit to page, reduce image if necessary—If the scanned image is too big to be printed or
faxed on a single page, the image will automatically be reduced to fit the page.
Actual size, crop image if necessary—If the scanned image is too big to be printed or
faxed on a single page, the image will automatically be cropped around its edges to fit on
the page.
Center image on page—The image will be printed in the center of the page instead of at
the top left corner.
Maintain aspect ratio—The aspect ratio is the length-to-width relationship of the image’s
dimensions. Select this option so the image’s relative proportions remain constant.
AutoRotate image for best fit—If the image is a Landscape format and the device is
printing in the Portrait mode, or vice versa, rotate the image to fit on the page.
Collate copies—If you are printing more than one page, collate the copies. Enter the
number of copies in the Copies box.
Advanced—Click to see additional settings for the device. The dialog box that opens is
specific to the device. For example, if the device is your printer, the dialog box is your
printer’s setup settings.
2. Click OK or Apply.