Xerox EX7750 Computer Monitor User Manual


 
A
A-6 Print Options
Combine Separations
Printer’
s default/Off/On
When printing separations from
supported desktop publishing
applications:
Select On to combine separations on a
single page.
Select Off to view separations as four
individual black-and-white pages,
each representing one color plate.
The Printer’s default setting reflects the
setting specified in EX7750 Setup.
This option is not available for PCL
printing.
For more information, see the
Color Guide.
Copier Mode
Printer’
s default/Photo/Map
Specific modes produce optimum
results with certain files. Choose the
mode best suited for your job:
Photo works best if the file is a
photograph.
Map works best with text or data with
thin lines.
This option is not available in the PCL
printer driver.
Copies
1
-999
Specify the number of copies of the job
to print.
Do not enter a value greater than 999.
Create Master
None
/1-15
To create a FreeForm master from this
job, specify a number to assign to the
FreeForm master file.
For more information, see page 5-2.
Command WorkStation/Command
WorkStation LE allows you to select up
to 100 FreeForm Masters.
This option is not supported for PCL.
Creep Adjustments
Off
/Normal/Thick
Use this option to adjust images that may
shift from the center of the sheet in
booklet print jobs.
Creep can occur when booklet jobs have
a large number of pages or when booklet
jobs are printed on thick media. For more
information, see page A-15.
This option is not supported for PCL.
Duplex
Off
/Long Edge Binding/Short Edge
Binding
Select Off for simplex (single-sided)
printing.
Select Short Edge Binding for duplex
(double-sided) printing with both sides
using the same top edge.
Select Long Edge Binding for duplex
printing with the back side upside down
The Duplex unit must be installed.
For more information on duplex
printing, see page A-15.
Option and settings
(default setting is underlined)
Description
Requirements, constraints,
and information