Filter
Top Products
A
A-11 Print Options
Save Fast Reprint
Off
/On/RIP only
Specify whether to save a job’s raster data
to disk after printing, so the data will be
available later for reprinting (without
reRIPping).
With this option set to On, all print
option settings remain with the saved
raster data each time the job is reprinted.
To print the job with new print option
settings, you must remove the raster data
and reRIP the job.
This option is not available in the PCL
printer driver.
Screen Switching
On
/Off
If you choose Off, all objects on page will
use a low-frequency screen.
If you choose On, text will use a high-
frequency screen and graphics and image
objects will use a low-frequency screen.
This option is not supported for PCL.
Secure Print
Assign a password to the job for secure
printing. Your job is held at the EX7750.
To print your job, enter the password at
the Control Panel on the EX7750.
This option field has a 10-character limit.
This option is not available in the PCL
printer driver.
Slip Sheet
On/Off
Specify whether to insert a slip sheet
between copies of multiple-copy jobs.
Slip Sheet Paper Source
Tray 1 (MPT)/T
ray 2/
Tray 3/Tray 4/
Tray 4 (High Capacity)/Tray 5/
Tray 5 (High Capacity)
Specify the paper tray to use for the
slip sheet.
Option and settings
(default setting is underlined)
Description
Requirements, constraints,
and information