Filter
Top Products
2
2-2 Printing from Mac OS Computers
TO SELECT THE EX7750 AS THE CURRENT PRINTER
1. Make sure the EX7750 is connected to the network and turned on.
2. Select Chooser from the Apple menu.
3. Click the AdobePS icon to select it.
N
OTE: Make sure AppleTalk is set to Active.
4. If your network is divided into zones, select the zone in which the EX7750 is located.
5. Select the EX7750 by <Server Name>_<Queue Name>_ from the “Select a
PostScript Printer” list.
The names of all supported printers in the zone appear.
NOTE: If your system administrator has not enabled the connection to the Print
queue or the Direct connection, the corresponding names will not appear in this list.
For example, if your site has an operator who controls the flow of print jobs from
Command WorkStation/Command WorkStation LE, you may be able to print only to
the Hold queue. For more information on enabling print connections, see the
Configuration Guide.
6. Close the Chooser window.
The EX7750 remains selected as the current printer until you select a new printer in
the Chooser.