Filter
Top Products
A
A-4 Print Options
Option and settings
(default setting is underlined)
Description
Requirements, constraints,
and information
Auto Trapping
Printer’
s default/On/Off
Specify whether the job should
automatically trap text and graphics
independently of their application.
The Printer’s default setting reflects the
setting specified in EX7750 Setup.
This option is not supported for PCL.
Black Detection
On
/Off
Select Off if your job consists of black-
only text pages combined with a
significant number of color pages.
Select On if you are printing a
predominantly black and white job.
Color Mode or Print Mode must be set to
CMYK, Standard Color, or Expert Color.
This option is not available for PCL
printing.
Black Overprint
Printer’
s default / Off / Text /
Text/Graphics
Select Off to print black text and graphics
with knockouts.
Select Text to overprint black text.
Select Text/Graphics to overprint black
text and graphics.
The Printer’s default setting reflects the
setting specified in EX7750 Setup.
For Windows, choose Expert Color as the
Color Mode to access this option.
If this option is set to Text or Text/
Graphics, the Combine Separations
option must be set to Off.
Setting this option to Text or Text/
Graphics automatically sets the Pure
Black Text/Graphics option to On. For
more information, see the Color Guide.
This option is not available for PCL
printing.
Booklet Maker
Off
/Standard Booklet/
Right Binding/Perfect/
Double Print/Speed Print
Specify to arrange the pages of your job
in special layouts for folding or cutting
after printing.
The Duplex unit must be installed.
For booklet jobs, the Page Size print
option setting must match the paper size
setting on the printer. If the settings do
not match, the booklet will be printed at
the wrong size.
This option is not supported for PCL.
For more information, see page A-13.
Brightness
85% Lightest/90% Lighter/95% Light/
100% Normal
/105% Dark/
110% Darker/115% Darkest
Select 85% for a substantially lighter
image, 115% for a substantially darker
image, or use one of the settings in
between.
This option is not supported for PCL.