Filter
Top Products
1-10 Getting Started
PC Cable
Your Xerox WorkCentre 385 is equipped with a parallel interface port for
use with IBM PCs and compatible computers. Using the supplied
Centronics parallel cable, connect your WorkCentre 385 to a computer that
supports bi-directional communications (IEEE standard 1284).
Note: If using another parallel cable, ensure that it meets IEEE standard
1284 specifications.
To connect the WorkCentre 385 to a computer, follow the steps
below:
CAUTION: Make sure the computer is turned off, and the WorkCentre 385
is unplugged from the power outlet.
1 Plug the parallel cable into the connector on the back of the
WorkCentre 385. Swing the metal clips of the connector inward until
they lock firmly inside the notches on the parallel cable connector.