Filter
Top Products
Manual Faxing 3-9
3
If an error occurred during your fax transmission, an error message appears
in the display. If you receive an error message, press Stop to clear the
message and try to send the document again.
For a listing of error messages and their meanings, see LCD Display Error
Messages on page 7-8.
Memory Transmission (Broadcasting)
With Memory Transmission, documents are stored in memory and
automatically sent to one or more remote stations. Use this feature to send
your documents to multiple locations.
You can store a maximum of ten fax numbers for a memory transmission.
If you need to send your fax to more than ten locations, you can increase the
number of fax locations dialed by including a Group Dial number as one of
the ten numbers.
After sending, the documents are automatically erased from memory.
1 Adjust the document guides to match the width of the document.
2 Slide the document face down into the Automatic Document Feeder
until it is grasped and pulled into the machine.
If necessary, adjust the resolution and contrast. For details, see
Resolution on page 3-21 and Contrast on page 3-23.
3 Press the Menu button, then press the Memory TX button on the One-
Touch keypad.