Filter
Top Products
1-40 Getting Started
Adjusting Speaker Volume
1
Press the Speaker button on the front panel to adjust the speaker
volume. If you cannot hear a dial tone, check the phone line connection.
2 The display indicates PHONE. Press the Up or Down button
repeatedly until the desired loudness setting is displayed. Loudness is
set in the range from 1 through 7, with 7 representing the loudest
setting.
3 After choosing the desired volume level, press the Speaker button to
return to the Standby mode.
Setting the Clock Mode
You can configure your machine to display time using either a 12 hour or 24
hour format.
1 Press the Menu button, then press the System Data (01) button on the
One-Touch keypad. PAPER SIZE appears on the display.
2 Press the Up button.
CLOCK MODE appears on the LCD display.
The display prompts you to select either a 12 hour or 24 hour Clock
Mode.
3 Press 1 to select a 12 hour Clock Mode or, Press 2 to select a 24 hour
Clock Mode .