Filter
Top Products
SCSI Connection Set Up
18
Installing the SCSI Convertor to the CRW2200 drive
Notes
• Do not touch the connector pins or the circuit board. Otherwise, it may cause a malfunction with
the SCSI convertor.
• Please follow the instructions below. Do not use excessive force when installing. Otherwise, it
may cause damage.
5
55
5
Attach the SCSI convertor (included) to the rear of the CRW2200 drive.
6
66
6
Secure the SCSI convertor to the CRW2200 drive with the screw
(included).
Note
Do not apply excessive force when tightening the screw.
The jumper switch for the IDE settings on the rear panel of the CRW2200 drive
can be set to any of MASTER/SLAVE/CSEL. This setting does not affect the
CRW2200 drive operation. (
→
→→
→P. 42)
SCSI Convertor
Screw