Yamaha CRW2200S Personal Computer User Manual


 
E-IDE (ATAPI) Connection Set Up
46
10
1010
10
Connect a 4-pin power cable to the power supply connector of the
CRW2200E marked “DC INPUT.”
Notes
There may be more than one 4-pin power cable available. Any one may be used.
These connectors are D-shaped, so you can only connect the power cables in the correct
orientation. Do not apply excessive force when making this connection.
11
1111
11
Tighten the four fastening screws on the side of the unit securely using a
phillips screwdriver. (
P. 28 step
15
1515
15
)
12
1212
12
Attach the outer casing and all cables and peripheral devices of the
computer and any screws that were removed. (
P. 29 step
16
1616
16
)
13
1313
13
Reconnect the computer to the AC outlet and turn it on.
(
P. 29 step
17
1717
17
)
When you turn on the computer, make sure the LED on the panel of the
CRW2200E blinks in green, which indicates that it is reading disc information.
(
P. 60)
4-pin power cable
Bottom
Top
DC INPUT
connector