Yamaha CRW2200S Personal Computer User Manual


 
SCSI Connection Set Up
30
Configuring for the Operating System
18
1818
18
After the computer’s operating system (Windows 95/98/98 Second
Edition/Me) has loaded, open “Control Panel” and double-click on the
“System” icon. Select the “Device Manager” tab and double-click on
“CDROM.” If the drive has been correctly installed, it should be listed as
shown below. Similarly, double-click on “SCSI controllers” and the
SCSI card should be listed as shown below if it has been properly
installed.
* This is a screen shown in the Windows Me environment.
For Windows NT
You can verify by opening “Control Panel,” double-clicking on “SCSI Adapter” and clicking
on the “Devices” tab.
For Windows 2000 Professional
You can verify by opening “Control Panel,” double-clicking on “System,” selecting the
“Hardware” tab, and clicking on the “Device Manager” button in “System Properties.”
Notes
For details about how to use the operating system, refer to the documentation that came
with it.
If there is a or mark etc. next to the icon for the CRW2200S or the SCSI card, this
means that it has not been installed correctly.