Yamaha CRW2200S Personal Computer User Manual


 
SCSI Connection Set Up
28
14
1414
14
Connect the 4-pin power cable from the computer’s power supply to the
power cable from the CRW2200S.
Notes
There may be more than one 4-pin power cable available. Any one may be used.
These connectors are D-shaped, so you can only connect the power cables in the correct
orientation. Do not apply excessive force when making this connection.
15
1515
15
Tighten the four fastening screws on the side of the unit securely using a
phillips screwdriver.
4-pin power
cable
Bottom
Top
Bottom
Top
Power cable