Filter
Top Products
50
Operation
You can load and eject a disc (as described below) only when the computer is turned
on.
1
11
1
Open the tray by pressing the Eject button on the
CRW2200
drive’s front
panel.
2
22
2
Place the disc onto the tray with its label or printing facing upward.
3
33
3
Close the disc tray by pressing the Eject button again. You can also
gently push it closed.
Load or unload the disc after the tray has fully opened. Do not push or pull
the tray using excessive force. Doing so can damage the drive or the disc.
1
11
1
Open the tray by pressing the Eject button on the
CRW2200
drive’s front
panel.
2
22
2
Removethediscfromthetray.
3
33
3
Close the disc tray by pressing the Eject button again. You can also
gently push it closed.
Loading a Disc
Ejecting a Disc
12
12