Filter
Top Products
66 Zebra S-Series User’s Guide
SYMPTOM DIAGNOSIS ACTION
Printer stops. PAUSE light
and PAPER/RIBBON light
both ON.
Media incorrectly loaded or not
loaded.
Load media correctly. See
“Media Loading” on page 15.
Misadjusted media sensor.
Media not calibrated.
Check position and sensitivity
of media sensor and/or
calibrate media. See “Media
and Ribbon Sensor Sensitivity
Adjustment” on page 63 and
“Calibration” on page 43.
Printer stops. PAUSE light ON
and PAPER/RIBBON light
FLASHING.
Ribbon incorrectly loaded or
not loaded.
Load ribbon correctly. See
page 11 for the 105Se and
page 14 for the 160S.
Malfunctioning ribbon sensor. Call a service technician.
Printer stops. PAUSE light ON
and PRINTHEAD light
FLASHING.
Printhead is not fully closed. Close printhead completely.
Printhead open sensor not
detecting its position flag.
Call a service technician.
Printer stops. PAUSE light
and PRINTHEAD light both
ON.
Printhead element is
overheated.
Printer resumes printing when
the printhead element cools. If
condition persists, move
printer to a cooler
environment.
Power supply is overheated. Printer resumes printing when
the power supply cools. If
condition persists, move
printer to a cooler
environment.
Dots missing in printed area of
label.
Printhead element going bad. Call a service technician.