Filter
Top Products
Zebra S-Series User’s Guide 79
%®ÏÆ
3HHO2II
Your printer may be equipped with the peel-off option. In the peel-off
mode, only the label backing rewinds onto the rewind spindle. The
peel/tear bar separates the label from the backing and the label available
sensor activates the PAUSE mode to allow the operator to remove a
printed label before subsequent labels print.
This option cannot be added to a printer equipped with the optional Cutter.
&XWWHU0RGXOH
Your printer may be factory equipped with a cutter module that cuts labels
after they have been printed. In addition, an optional cutter catch tray can
be added to gather the labels once they have been cut.
0HGLD5HZLQG
Your printer may be equipped with a media rewind option. This option
supports both the rewind and peel-off modes of operation.
In rewind mode, both labels and backing material rewind internally onto a
user-supplied 3" core. A rewind bracket guides the media back to the
rewind spindle after printing.
This option cannot be added to a printer equipped with the optional Cutter.
(See Peel-Off Option above for peel-off mode of operation.)