Filter
Top Products
112 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Cleaning
Cleaning the Laminator
Cleaning: Laminator Media Feed Rollers
The default cleaning interval is once every 5000 cards.
Step 1. Select Clean Lam Rollers to run the Laminator Roller Cleaning Routine.
Step 2. Lift the Laminator Door to its upright position.
Step 3. Remove the Laminate Cassette(s).
Step 4. Leave the Laminator Door open
Step 5. Use the Cleaning Swab in the Laminator Cleaning Kit. Bend the swab to release the
cleaning fluid.
Step 6. Press Next when ready, then press Top.
Step 7. Clean the top media roller (circled below) by moving swab tip side-to-side as it turns
five full revolutions. Only use moderate force.