Filter
Top Products
Setting Custom Card Specifications
Adjustments
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 145
B.4.1 Adjustment Overview
When making adjustments, be aware that interdependencies exist between parameters; e.g., to
fix the upward warpage, the first step is to decrease the front side transfer temperatures; but
this could affect the partial transfer and possibly the flash.
To compensate for interdependency issues, adjust the parameters in the following order:
Step 1. Start by correcting any partial transfer issues using the same procedure outlined in
Section B.4.2.
Step 2. Then attempt to improve warpage (Section B.4.3) and indentations (Section B.4.4).
Start with the acceptable settings from Step 1. While adjusting parameters, ensure that
the transfer quality remains acceptable. Do not continue reducing temperatures or
increasing speeds if the transfer quality becomes unacceptable.
Step 3. Then attempt to improve flash (Section B.4.5). Start with the acceptable settings from
Step 2. While adjusting parameters, ensure transfer and warpage remain acceptable.