Filter
Top Products
Operation
Printing a Sample Card
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 49
Printing a Sample Card
Sample card designs are installed with the printer driver. To print a sample card:
1. Access the Card Setup Tab, select Start > Printers and Faxes. Right click on the Zebra
ZXP Series 8 Card Printer listing; and select Printing Preferences > Card Setup.
2. Ensure that cards are in the Input Hopper.
3. Click of the Test Print button (circled above).
4. The printer will feed in a card and start printing.
5. Once the printing job is complete, the card is ejected from the printer into the
Output Hopper.
Note • It is normal for the Printer to warm up to operating temperature before printing.