Filter
Top Products
Installation
Connecting to the Computer
18
P1003638-003 TTP 8000 Technical Manual 10/19/2009
Connecting to the Computer
Using the Parallel Interface
1. Connect the printer to the parallel port of the computer to be used.
2. Connector J10 is an IEEE-1284 type C, 36-pole mini Centronics, with clip latches. See
Figure 21 on page 96 for pin assignment of J10.
3. Use only certified cables marked IEEE-1284. See Part Number List on page 124 for
cables from Zebra Technologies.
Figure 7 • IEEE-1284 cable with Type A and Type C Connectors
Caution • Using a non-approved cable with the printer may void the FCC and other EMC
approvals of the printer.