Zebra Technologies 105Se Printer User Manual


 
Ribbons and Printhead Wear
CAUTION: Ribbons used in the Zebra Technologies Corporation
Printer MUST be as wide as or wider than the media. Zebra-brand rib-
bons provide an extremely smooth backing surface that protects the printhead
from abrasion by the media. If the ribbon is narrower than the media, areas of
the printhead will be unprotected and subject to premature wear.
Repacking
CAUTION: If shipment of your printer is necessary, carefully pack the
printer in a suitable container to avoid damage during transit. Whenever
possible, use the original container from the factory. If the original con-
tainer is not available, an optional packing kit can be purchased from
Zebra. When using a different container, a procedure similar to the original
factory packaging should be followed.
Referto“Installationforfurtherrepackinginstructions.
Zebra S-Series User’s Guide 1-5
13