Filter
Top Products
Installation
Unpacking
When unpacking the Zebra S-Series Printer, make sure you save all
packing materials. Once the printer is out of the box, raise the printer’s
Media Access Door and remove the power cord.
Inspection
Inspect the printer for possible damage incurred during shipment.
•
Check all exterior surfaces for damage.
•
Raise the Media Access Door and inspect compartment for damage
to components.
Reporting Damage
If you discover shipping damage upon inspection:
• Immediately notify the shipping company of the damage.
• Retain all packaging material for shipping company inspection.
• File a damage report with the shipping company and notify your lo-
cal distributor and Zebra Technologies Corporation of the damage.
Zebra Technologies Corporation is not responsible for any damage
incurred during shipment of the equipment and will not repair this
damage under warranty. Immediate notification of damage to the
shipping company or its insuring agency will generally result in en-
suring any damage claim validity and ultimate monetary compensa-
tion.
Storage and Reshipping
If you are not placing the printer into operation immediately, repackage
it using the original packing materials. The S-Series Printer may be
stored under the following conditions:
Zebra S-Series User’s Guide 2-1
23